"The Synergy Co"

 
Overview:
Products:
  Catalog
  Applications
  Quick List
  Themes
  Packages
Systems:
  WTC
  N-Former (New)
Documentation:
  Product
  Technical
Information:
  Product ID
  Documents
Partners:
  Data-Command
  TSR

 

 

 

>> Spread Spectrum Radio (SSR) <<

 

Specifications

Overview

How To Order

Details

 
 
The Spread Spectrum Radio

Specifications


Brochure


Physical

o         Dimensions:  3 inches x 1.2 inches x 2.7 inches (AUX)     3 inches x 1.2 inches x 3.5 inches (DIN)

o         Mounting: Bulkhead, DIN

o         Connections:

§          RS-232, Female 9 Pin Subminiature D connector

§          Power & RS-485, Wire Range 28 – 14 AWG

§          Antenna, Reverse-polarity SMA

o         Indicators:

§          Fail (Red)

§          Power / Transmit activity (Green).

§          Radio Receive activity (Yellow)

§          TX (Yellow) activity. RS232 or RS485

§          RX (Yellow) activity. RS232 or RS485

§          RS232 Mode

§          RS485 Mode

Electrical –

o         Supply Voltage: 11 to 26 VDC

o         Current draw: Receive 100 mA, Transmit 250 mA max

o         Frequency: 902-928 MHz

o         Modulation Type: Spread Spectrum, Frequency Hopping Wide band FM.

o         Channel Capacity: 7 hop sequences sharing 25 frequencies.

o         Transmit Power: 140 mW.

o         Receiver Sensitivity: -110 dbm

o         RS232/RS485 baud rate: 9600 Default, 1200 – 57600

o         RF Data Rage: 9600 baud, Fixed.

o         Receive Buffer Size: 16 bytes.

o         Flow Control: (RS232 Only) RTS/CTS Enabled, Default

Range –

NOTE:          Ranges specified are typical.  Actual range will depend on several factors including antenna type, distance above ground, and presence of obstructions.

o         Indoor:  1500 Feet

o         Outdoor, Line of Sight:  7 – 20 Miles

Environmental -

o        Operating Temperature: -30 to 80 degrees C

o        Operating Humidity: 5 to 95%

Warranty –

o        7 years, Transferable

 

 

"Wireless TransCeiver (WTC)"

"Telephone Lines are for the Birds"

As leased dedicated phone lines are becoming more difficult to acquire, AGM customers are switching to wireless data communications using AGM's Data Handlers (DH) and Spread Spectrum Radios (SSR).

"Beep Alert"

The Data Handler, when combined with your existing  pager system, provides a convenient, low cost way to detect and broadcast remote site alarms such as a pump failure or unauthorized intrusion.

"AWT"

Erratic flow signals can result in unnecessary wear and tear on chemical feed equipment.

Use the Data Handler application, "Average with Time", to smooth the signal.

 

Home | Contact Us | Support | FAQs | About Us

© 2007 AGM Electronics, Inc. All rights reserved