|
Available Signal Conditioners –
o
DC, AC,
Thermocouple, Resistance Temperature Transmitters
o
Differential Temperature
o
Signal
Alarm Module
o
Adder /
Subtractor, Multiplier / Divider
o
Analog
Characterization Module, Square Root Extractor, Etc.
o
Ramp
Generator
o
Signal
Selector
o
Integrator
o
Averager
o
Suppression Discriminator
o
Pulse to
Pulse Scaling
o
Strain
Gage
o
Sample /
Hold
o
Rate
Limiter
o
BTU
Computer
o
Positioner
o
Mass
Flow computer, Gas Flow computer
o
Pulse
Accumulator
o
Analog /
Pulse Duration, Pulse Duration / Analog
o
Pulse or
Frequency / Analog, Scaled Pulse
Electrical –
o
Supply
Voltage:
o
Module:
24 VDC
o
Assembly
(with Power Supply Module): 115 VAC 60Hz
o
Inputs:
Any AC, DC, RTD, T/C, Strain Gage, Contact
Closure (specify)
o
Outputs:
Any DC, Frequency, Relay Contact (specify)
Physical –
o
Dimension:
o
Module:
1 1/8 x 3 x 2 1/2 Inches (includes connectors)
o
PTA
assembly: 2 3/4 x 8 1/2 x 3 3/4 Inches
o
TA
assembly: 21 x 10 x 3 Inches Maximum
o
EIA
assembly: 19 x 5 1/4 x 10 Maximum
o
NEMA
12/4 assembly: 4 x 6 x 4 (Typical)
o
Package:
Circuitry hermetically sealed
o
Mounting:
o
Module:
§
Plugs
into PTA, TA, or EIA Assemblies
§
DIN
§
Snap
Track
§
Surface
Mount
o
Assembly:
§
Surface
(PTA, TA)
§
Rack
(TA, EIA)
o
Connectors:
o
Module
Pins: Gold plated over Beryllium copper
o
Screw
Terminals. Wire Range : 22 - 12 AWG
Performance –
o
Calibration Accuracy: ±0.10 %
o
Linearity / Repeatability: ±0.10 %
o
Temperature Sensitivity: ±.005 % / degree C
o
Line
voltage sensitivity: ±.0001% / 1% line change
o
Signal
to DC Power Isolation: Standard
o
Input to
Output Isolation: Optional, 1500 Vp-p
o
Extremely High Common / Normal Mode Noise Rejection
o
Zero
Droop Sample-Hold and Ramp Generator Circuits
o
Output:
o
Current:
(Automatic R loop correction)
§
1/5
mADC into 0-2400 Ohm std., 0-5000 Ohms optional
§
4/20
mADC into 0-600 Ohm std., 0-1500 Ohms optional
§
10/50
mADC into 0-200 Ohm std., 0-600 Ohms optional
o
Voltage:
(Normally zero Ohm source impedance) 0 to 10 mADC into
load
o
Control
Relay: 10 AMP contacts, Resistive
o
Pulse:
Any V or I source or Sink
o
Input
Impedance:
o
1/5 mA
is 200 Ohm, 4/20 mA is 50 Ohm, 10/50 mA is 20 Ohm
o
V and mV
is Greater than 10 Mega ohms
o
CSA
Certified: Yes for 115 VAC Assemblies
Environmental –
o
Operating Temperature:-30 to 80 degrees C
o
Operating Humidity: 5 to 95%
Warranty –
7 years,
Transferable
|
Specifications
