The following is meant as a guide only. The Signal Conditioner may be ordered by simply specifying input, output, function, power and assembly / enclosure requirements. You may specify these in any order and add any comments you feel are important.

Note: Please contact our Domain Engineering staff if you are unsure of which Signal Conditioner to specify for your application. We will also work with you to develop OEM products.

Step 1: Select the AGM Product Number that corresponds to your typical input / output or function requirements using the Product by Input / Output Table or the Product by Function Table.

Step 2: Identify your specific Input / Output calibration requirements. Note: Auxiliary current transformer for AC Current (0/5 ampere) inputs signals are furnished at no cost.

Step 3: Identify your available power.

Step 4: Select Assembly type. Refer to the Enclosure / Assembly Data Sheet for options. Note: DIN mounting clips are furnished at no cost. AUX, HPM, & DIN assemblies complete as shipped.

Step 5: Place an order by using the Submittal Form, phone, fax or e-mail.

Following are examples of Signal Conditioner orders:

1. Pulse Duration Transmitter, 4/20 mADC in, 3/12,15 sec out, 120 VAC powered, mounted in NEMA IV enclosure.

2. DIN4000-13, 1/5 VDC in, 4/20 madc out, 12 VDC powered.

3. HPM5100-15, 0/1000 PPS, mag pickup, 2 wire, loop powered.

4. AUX4006-0, 4/20 mADC in, 4/20 mADC out, exponent = 2.5, 24 VDC powered.

5. DC to DC Isolator, 4/20 mADC in and out, PTA assy, 120 VAC, 1600 ohm drive option.

Note: Be sure to include your name and a contact number in case we have any questions regarding your order