Physical -

·          Dimension: 8 3/4 x 10 1/2 x 2 3/4 Inches

·          Mounting: Surface, In Panel

·          Connectors:

Power: 2 Screw Terminals.  Wire Range: 22 - 12 AWG

RS-232 (2 each): 

Male 25 pin Subminiature D.

Female 25 pin Subminiature D.

Electrical -

·          Supply Voltage:  12 VDC

·          Current draw: 300 mA Nominal

·          CPU: Industrial Hardened Microprocessor

Software -

·          Diagnostics:

Built In Self Check

Watch Dog Timer

·          Memory:  

Up to 512 Kbytes of Non-volatile RAM for Data Logging.

Environmental -

·          Operating Temperature: -30 to 80 degrees C

·          Operating Humidity:  5 to 85%

Configuration -

·          Configuration Interface: 

Settings configured via RS-232

Logs data from ICS for monitoring.

Communications -

·             RS-232C: (2 Ports)

Baud Rates:

Default:  1200

Selectable:  300 - 19200

Bit Format:

Default: 8 Bits, 1 Stop, No Parity.

Selectable: 7 - 8 Bits, 1 - 2 Stop, Even or Odd Parity.

One port configured as DCE for direct connection to computers or ICS

Second port configured as DTE for direct connection to Data Handler

·          Protocols:

Default: ASCII

Selectable:

Modbus

Customer specified.

·          Connections:

Computer

Dial-Up Telephone Modem

Radio Modem:

Adjustable RTS Delay

Full-Duplex

Half-Duplex

Warranty -

·          7 years, Transferable

"Wireless TransCeiver (WTC)"

"Telephone Lines are for the Birds"

As leased dedicated phone lines are becoming more difficult to acquire, AGM customers are switching to wireless data communications using AGM's Data Handlers (DH) and Spread Spectrum Radios (SSR).

"Beep Alert"

The Data Handler, when combined with your existing  pager system, provides a convenient, low cost way to detect and broadcast remote site alarms such as a pump failure or unauthorized intrusion.

"AWT"

Erratic flow signals can result in unnecessary wear and tear on chemical feed equipment.

Use the Data Handler application, "Average with Time", to smooth the signal.