Description –

The Sample and Hold accepts a 4/20 mADC signal and a Contact Closure. The output of the Sample and Hold will Hold the last Sampled input until the Contact is closed. When the Contact is closed, the output of the Sample and Hold will sample the input and Freeze it.  The output will continue to Hold the last Sampled Input value until the Contact is Opened and Closed again.

The Sample and Hold

Specifying/Ordering –

Product Application Number (PAN)

SF9

Specifications –

            E – NEMA 1 Rated Enclosure

            P – 115 VAC, 60 Hz

            I1 – Input 1 – 4/20 mADC, Z = 50 Ohms

            I2 – Input 2 – Dry Contact

            O – Output – 4/20 mADC, 550 Ohms Drive

Use the following table to specify other options.

Example – SF9–EB-PB

Resulting Specifications –

            E – DIN Rail Mounting

            P – 24 VDC

            I1 – Input 1 – 4/20 mADC, Z = 50 Ohms

            I2 – Input 2 – Dry Contact

            O – Output – 4/20 mADC, 550 Ohms Drive