Description –

 

The Signal Limiter accepts a 4/20 mADC signal and has two adjustments that are used to set the Upper and Lower Limits for which the output 4/20 mADC is limited to. For example, if the Lower limit is set to 8 mADC and Upper limit is set to 16 mADC then if the input goes below 8 mADC the output will remain at 8 mADC and if the input goes above 16 mADC the output remain at 16 mADC.

 

 

Specifying/Ordering –

 

Product Application Number (PAN)

 

SF10

 

Specifications –

            E – NEMA 1 Rated Enclosure

            P – 115 VAC, 60 Hz

            I – Input  – 4/20 mADC, Z = 50 Ohms

            O – Output – Optically Isolated 4/20 mADC, 550 Ohms Drive

 

Use the following table to specify other options.

 

 

Example – SF10–EB-PB

 

Resulting Specifications –

            E – DIN Rail Mounting

            P – 24 VDC

            I – Input  – 4/20 mADC, Z = 50 Ohms

            O – Output – Optically Isolated 4/20 mADC, 550 Ohms Drive